中文版  |   Favorites     
  Home About Us Products FeedBacK Contact Us  
 
 
Product Directory
Cast Iron Test Moulds
Plastic Test Mold
Car Repair Tools
Compression Testing Machine
Climate Chambers
Compression Testing Machine
Concrete Test Apparatus
Cement Test Apparatus
Soil Test Apparatus
Asphalt Test Apparatus
Aggregate Tester
The waterproof material testin
Lab Test Accessories
Electronic balance series
 
Contact Us
  Tel:086-317-5106220
      Skype:flm123
  Fax:+086-317-4633220
  Mobile phone: 086+13011998767
  E-mail:chinesemoulds@foxmail.com
  Skype:443229727@qq.com
  Website:http://www.chinesemoulds.com
  Address: No. 68 Nanguan Village, Xianxian County, Cangzhou City, Hebei Province
  Company news You're Here: Index > News > Company news >
BKJ-III electric compaction device to do compaction test
DATE:2015-02-06 21:01  Form:未知   Click:

BKJ-III electric compaction device to do compaction test (light, heavy also)

1, first check the three power line, and check the instrument power switch and counter parts, tighten the screw tube test, each part of the power supply is switched on, press the jog, watch the direction of movement ofthe rack rack, go for the positive rotation, inversion is strictly prohibited.

2, check whether the hammer in the test tube bottom, such as thehammer is not at the bottom, according to move, let the hammer fall tothe bottom of the cylinder test. Otherwise the hammer lifted, do not falldown.

The gap between the 3, check the hammer and the test tube wall (usually 3-5mm), don't try to cylinder wall shall prevail.

4, set the desired number of compaction.

5, press the start button, to start work on a panel with digital display,hammering times increased, to the numerical to set and automatically stop. (that is, a complete operating procedures).

6, if the heavy compaction, can be heavily above the operationprocedure.

  Valve Seat Cutter,Skid Resistance Tester, Compression Testing Machine
Copyright © 2015-2016 Cangzhou Oubeiruike Instrument Equipment Co., Ltd.  冀icp备15002400