中文版  |   Favorites     
  Home About Us Products FeedBacK Contact Us  
 
 
Product Directory
Cast Iron Test Moulds
Plastic Test Mold
Car Repair Tools
Compression Testing Machine
Climate Chambers
Compression Testing Machine
Concrete Test Apparatus
Cement Test Apparatus
Soil Test Apparatus
Asphalt Test Apparatus
Aggregate Tester
The waterproof material testin
Lab Test Accessories
Electronic balance series
 
Contact Us
  Tel:086-317-5106220
      Skype:flm123
  Fax:+086-317-4633220
  Mobile phone: 086+13011998767
  E-mail:chinesemoulds@foxmail.com
  Skype:443229727@qq.com
  Website:http://www.chinesemoulds.com
  Address: No. 68 Nanguan Village, Xianxian County, Cangzhou City, Hebei Province
  Company news You're Here: Index > News > Company news >
Compulsory HJW-60 type single horizontal shaft concrete mixe
DATE:2015-02-06 21:02  Form:未知   Click:

Compulsory HJW-60 type single horizontal shaft concrete mixermaintenance

1 maintenance of body cleaning, remove dirt and obstacles on the body.

2 check the lubrication oil and circuit and control equipment, and according to the requirements of the filling of lubricating oil.

3 per shift, water in the mixing cylinder idling 1-- to 2min, and check thereliability of the clutch and brake device work.

4 concrete mixer operation process, should always check listen to themotor, reducer, gear transmission noise is normal, temperature is too high,

5 each class after work, should carefully clean the concrete mixer

Compulsory HJW-60 type single horizontal shaft concrete mixer matters needing attention

1, concrete mixer should be set in the flat position, square timber pad upfront and rear axles, put the tires of overhead, so as to avoid walking in the start.

2, concrete mixer should implement two leakage protection, before going to work when the power supply is switched on, must be carefully examined, by the empty test switch that qualified, can be used.Commissioning should test the mixing cylinder speed is appropriate,under normal circumstances, the proportion of empty vehicle speed (after loading) 2~3 faster transfer, such as the difference between the more,should adjust the driving wheel and the drive wheel ratio.

3, the direction of rotation of the mixing drum should be consistent withthe direction of the arrow, such as false, should correct electrical wiring.

4, check whether the drive clutch and brake is flexible and reliable, the steel wire rope is damaged, the track pulley is good, around the barrier free and all parts of the lubrication and other suppliers

5, boot, always pay attention to all parts of the concrete mixer is functioning properly. When stopping, often check the concrete mixerblade is bent, has knocked out or loose screws.

6, forced type single horizontal shaft concrete mixer concrete when mixingis completed or is expected to rest more than 1h, than I expected out of the net, application of gravel and water into the cylinder rotation shaking,the boot, the mortar in the cartridge rinse all the unloading. Water may not be the barrel, so as to avoid the barrel and leaf rust. At the same time also should clean up outside the mixing tube fouling, make the machinekeep clean and in good condition.

  Valve Seat Cutter,Skid Resistance Tester, Compression Testing Machine
Copyright © 2015-2016 Cangzhou Oubeiruike Instrument Equipment Co., Ltd.  冀icp备15002400